This library is intended for laboratory and research use only. By entering, you confirm you are 18 or older and accessing this material for research and educational purposes — not for human or animal consumption.
In a laboratory setting, a U-100 insulin syringe is a common tool for measuring small volumes of a reconstituted research solution. Its barrel is marked in insulin units rather than millilitres, so working with one requires reading that unit scale and converting it to a volume. This page explains how the unit markings map to millilitres on a U-100 syringe and walks through worked conversion examples. It covers laboratory measurement technique only and does not describe human use.
The “U” scale on an insulin syringe is a concentration scale, not a volume scale. A U-100 syringe is graduated on the assumption that the liquid contains 100 insulin units per millilitre. That gives the single most useful relationship for the bench:
Because the markings are simply 1/100 of a millilitre each, you can treat the unit scale on a U-100 syringe as a volume scale where every unit equals 0.01 mL. To convert in either direction:
So 40 units corresponds to 0.40 mL, and 0.25 mL corresponds to 25 units. The 100-units-per-mL convention is the defining feature of U-100 labelling.1
A U-40 syringe is graduated for 40 units per millilitre, so its unit marks correspond to different volumes (1 unit = 0.025 mL). U-40 syringes exist mainly in veterinary contexts and usually carry a different cap colour. The unit-to-mL conversions on this page apply only to a U-100 syringe; always confirm the barrel is printed “U-100” before using these numbers.2
U-100 insulin syringes are commonly sold in three barrel capacities. They share the 100-units-per-mL scale but differ in how finely the barrel is marked, which affects the smallest volume you can read with confidence.1
| Barrel size | Full scale | Smallest line | Smallest readable volume |
|---|---|---|---|
| 0.3 mL | 30 units | 1 unit | 0.01 mL |
| 0.5 mL | 50 units | 1 unit | 0.01 mL |
| 1.0 mL | 100 units | 2 units | 0.02 mL |
A practical consequence: on a 1.0 mL barrel each small line is worth 2 units (0.02 mL), and the numbered long lines fall every 10 units. On the 0.3 mL and 0.5 mL barrels each small line is worth 1 unit (0.01 mL).3 For measuring small volumes, the narrower 0.3 mL barrel resolves single units, whereas a 1.0 mL barrel forces you to estimate odd-unit volumes between lines. Choosing a barrel whose full scale is close to your target volume gives the most readable measurement.
| Units | Volume (mL) | Volume (µL) |
|---|---|---|
| 5 | 0.05 | 50 |
| 10 | 0.10 | 100 |
| 20 | 0.20 | 200 |
| 25 | 0.25 | 250 |
| 40 | 0.40 | 400 |
| 50 | 0.50 | 500 |
| 75 | 0.75 | 750 |
| 100 | 1.00 | 1000 |
These examples show how to go from a target mass of a reconstituted peptide to a reading on the U-100 unit scale. They assume the vial has already been reconstituted to a known concentration. The two-step method is the same every time: first find the concentration in mg/mL, then convert your target mass to a volume, then read that volume as units.
Step 1 — concentration: 5 mg ÷ 2 mL = 2.5 mg/mL. On a U-100 syringe, 1 unit (0.01 mL) therefore contains 2.5 × 0.01 = 0.025 mg.
Step 2 — mass to volume: divide the target mass by 2.5 mg/mL.
Step 1 — concentration: 10 mg ÷ 1 mL = 10 mg/mL. Here 1 unit (0.01 mL) contains 0.10 mg.
Step 2 — mass to volume:
Notice that the same 1.0 mg target reads as 40 units in Example 1 but only 10 units in Example 2. The unit reading depends entirely on the concentration you reconstituted to, which is why the concentration step comes first.
If you simply need a fixed volume of solution regardless of mass, read it directly: 0.15 mL is the 15-unit mark, and 0.40 mL is the 40-unit mark. On a 0.3 mL or 0.5 mL barrel both fall on a labelled small line; on a 1.0 mL barrel, 15 units sits halfway between the 14- and 16-unit lines because that barrel steps in 2-unit increments.
This page is educational material on laboratory measurement technique for handling reconstituted research solutions. All products and information from Peptigo are for research use only (RUO) and are not for human or veterinary use, consumption, or any diagnostic or therapeutic application. The conversions and examples above describe how to read a measuring instrument in a laboratory and are not usage instructions, dosing directions, or medical advice. Nothing here is a claim about the effects of any compound. Researchers are responsible for handling all materials in line with applicable laws, institutional policies, and good laboratory practice.